Caterpillar H140D s Hydraulic Hammer

Caterpillar® introduces Caterpillar H140DS hydraulic hammer, the first of a new generation of work tools for the construction, demolition, mining and aggregates industries. The hammer is built on the strengths of its predecessor model, Caterpillar H140C s, but incorporates many improvements that enhance productivity and extend wear life.



Caterpillar H140D s is ideally matched to Cat® 325C and 330C hydraulic excavators. It is also compatible with a Cat 322C or similarly-sized excavator. The hammer measures 103.9 inches from the top plate to the tip of the tool. Its operating weight is 2 350 kg. It can be equipped with up to seven different tools for maximum versatility.

The hammer’s operating cycle has been redesigned to improve performance and simplify service. Impact frequency is 350 to 600 blows per minute - 25 to 30% higher than the previous design. The additional blow energy and frequency translate into faster, more effective material penetration and higher productivity. The new design also contains fewer parts, reducing the time required for machine setup, troubleshooting and hammer service.

The accumulator on Caterpillar H140D s can now be checked and recharged without removing the hammer from the machine, significantly improving uptime. The pressure control valve can also be adjusted without being removed from the hammer power cell.



In addition to all the new features, Caterpillar H140D s retains the best attributes of the C-Series hammer. Standard sound suppression improves operator comfort and environmental protection. A heavy-duty suspension system protects the hammer and carrier from recoil forces. A dust seal keeps dirt out of the housing, reducing wear on the power cell and other components. The lower tool bushing uses a slip-fit design for easy installation and can be rotated to double service life.

Caterpillar 3208 TA Marine Engines

Caterpillar 3208 Specifications

• Air Intake: dry-type, single stage air cleaner
• Alternator: belt-driven, 51 amp 12 volt
• Cooling: transmission oil cooler, heat exchanger, engine oil cooler, watercooled exhaust manifolds, auxillary sea water pump, expansion tank, thermostats
• Flywheel and flywheel housing: SAE No. 1
• Fuel: RH or LH filter and priming pump, shut-off solenoid (ETR), air fuel ration control
• Governor: mechanical
• Lubricating: LH oil filter, filler, RH or LH dipstick
• Starting: 12 Volt electric
• Tachometer drive: mechanical
• Torsional vibration damper

Caterpillar 3208 375 horsepower turbocharged diesels which provide the 13 ton craft with a speed of 35 knots. The high performance and dependability of the Caterpillar 3208 has made it the definitive marine engine!



Cat 3208 engines are used in many work applications such as delivery trucks, dump trucks, garbage trucks, snow plows, flatbed trucks and school buses. The Caterpillar 3208 is also used in many agricultural and industrial applications such as lift trucks, ag sprayers, cranes, power units, genorator sets, tractors, excavators, wheel loaders, compactors, articulated trucks and backhoes.

Caterpillar 247B and Cat 257B Multi Terrain Loaders

247B and 257B Multi Terrain Loader Brief Specifications

	Caterpillar 247B	Caterpillar 257B
Operating weight	6,668 lb (3024 kg)	7,559 lb (3428 kg)
Rated operating capacity at 35 percent tipping load Rated operating capacity at 50 percent tipping load	1,367 lb (620 kg)1,950 lb (885 kg)	1,615 lb (732 kg)2,3100 lb (1047 kg)
Engine model	Cat 3024C T	Cat 3024C T
Net engine power	57 hp (42 kW)	57 hp (42 kW)
Hydraulic power	15.6 gpm (60 L/min) 3,335 psi (23 000 kPa)	15.6 gpm (60 L/min) 3,335 psi (23 000 kPa) High Flow option: 26 gpm (100 L/min) 3,335 psi (23 000 kPa)
Linkage type	Radial	Vertical
Pin height at max. lift	112 in. (2862 mm)	119 in. (3018 mm)
Machine width	66 in. (1676 mm)	66 in. (1676 mm)
Length of track on ground	59 in. (1499 mm)	59 in. (1499 mm)

B-Series improvements for all models
The B-Series machines employ the proven anti-stall system and pilot hydraulic joystick controls that make Caterpillar Multi Terrain Loaders easy to operate. B-Series improvements include a deluxe joystick design that incorporates positive-action buttons to control work tool hydraulic or electrical functions. An ergonomically designed arm bar is rounded and sculpted to provide superior operator comfort, and the redesigned gauge panels are easy to read. The B-Series cab offers a new door option with 25 percent more glass that improves sight lines to the working area. The new door also incorporates a new loader lock out function that prevents loader arm movement when he door is open. A standard convex rearview mirror gives the operator a wider view behind the machine, and the lights are now adjustable 10-degrees up and down as well as side-to-side.

The improved B-Series hydraulic system design reduces the number of potential leak points and improves reliability and cleanliness. A 5-micron spin-on filter keeps hydraulic oil clean, and a high-efficiency hydraulic oil cooler allows the machines to work smoothly in high ambient temperatures.



The Caterpillar 247B and 257B Multi Terrain Loaders are compact, rubber-tracked machines designed for exceptional versatility, flotation, traction, stability and ride quality. The Multi Terrain Loaders combine the proven technology of the Cat® Skid Steer Loaders and a suspended track undercarriage. The suspended undercarriage transfers machine weight to the ground through 24 wheeled contact points bearing against 59 inches (1499 mm) of track on ground for very low ground pressure. The undercarriage remains unchanged in the B-Series.

The 247B is the smallest of the Multi Terrain Loaders with an operating capacity of 1,950 pounds (885 kg), when defined as 50 percent of tipping load. The 257B operating capacity is 2,310 pounds (1047 kg) at 50 percent tipping load. Both loaders now use the responsive Cat 3024C T engine, which complies with U.S. EPA Tier 2 emissions regulations. Net power is 57 horsepower (42 kW) in each machine.

Both B-Series models have greater hydraulic system performance than the models they replace. Standard flow is 15.6 gpm (60 L/min) and maximum pressure is 3,355 psi (23 000 kPa). The high flow option available on the 257B boosts flow to 26 gpm (100 L/min) and hydraulic horsepower increases 40 percent for highly productive operation of hydraulically powered work tools.



The 247B and 257B offer significantly greater breakout forces than their predecessors for aggressive digging capabilities. Caterpillar 247B has radial lift linkage, and the 257B features vertical lift linkage for improved loading and materials handling capabilities. Maximum pin heights are 112 inches (2862 mm) and 119 inches (3018 mm), respectively.

CAT 301.6C and 301.8C New Mini Hydraulic Excavators

With the introduction of the CAT 301.6C and the CAT 301.8C, Caterpillar has expanded the capabilities and enhanced many aspects of the two smallest excavators in the Cat® line. The C-Series models feature 22 percent more bucket digging force and greater than 10 percent more stick digging force than the previous models. Increased lift capacities add to versatility and flexibility.



The new models get more work done faster through an engine power increase of about 4 percent-to 18.1 horsepower (13.5 kW) and increased hydraulic flow and pressure. The engine meets US EPA Tier 2 and EU Stage II emissions standards. A new, variable displacement hydraulic pump eliminates stalling and enables the excavators to dig through the toughest conditions. Operating weight of the excavators is 3,792 pounds (1720 kg) when equipped with a cab and 3,548 pounds (1610 kg) with a canopy.



The CAT C-Series Mini Excavator cab is large and spacious for an expansive viewing area and good air circulation. For ventilation the cab has a retractable front window that can be stowed easily in the roof space with a gas strut assisted linkage. A suspension seat, console-mounted implement controls and adjustable wrist supports help reduce operator fatigue. Pilot hydraulic implement controls are low effort. The two-speed travel system is controlled by a switch on the dozer lever, which makes speed changes easier while dozing. The machine monitoring system is mounted near the operator's line of sight to ensure that gauges and warning lights can be seen easily...

Caterpillar 902 Wheel Loaders

Carry Cat Toughness To Multiple JobsCWL



CATERPILLAR - Wheel Loaders - 902

• Unique features and advantages of Cat Compact Wheel Loaders
• Types of applications that are suited for the Cat Compact Wheel Loaders
• Specs to help you find the ideal size for your work needs
• Work Tools that add to the versatility of the equipment
• Product support to enhance your Cat equipment owning experience
• Maintenance tips that help you keep running at top quality

Cab Comfort / Visibility
Roomy cab and excellent visibility cuts down on operator fatigue.



Joystick Operation Controls
- Pilot controls of big wheel loaders: With a design based on Cat® big wheel loaders, the compact series features the same highly responsive and easy-to-use pilot controls of their big brothers.
- Use with inching pedal: When precision counts, you can use the inching control for increased accuracy.
- Adjustable steering system: The 914G and IT14G features an adjustable steering system that can easily be lifted out of the way.

Linkage Systems
Get level load placement with superior reach, visibility and parallel lift.

Rugged Powertrain
Gear up for big productivity from high rimpull and torque rise.



Hydraulic Muscle
- Strong breakout forces: The increased breakout force is engineered from proven Cat® hydraulic muscle, which helps you move more material, more efficiently.
- Fast cycle times: The hydraulic power of the Compact Wheel Loaders produces fast cycle times, increasing bucket fill factors.
- Auxiliary valve: The auxiliary hydraulic control keeps the basic equipment movements at your fingertips.
- Incredibly smooth flow: The smooth hydraulic flow results in less jerking with accelerating and decelerating, which helps minimize operator fatigue.
- Reliable performance: Caterpillar wants to help you minimize downtime, and one way is to eliminate the possibility of belt wear and breakage. The hydraulically driven system means you don't have to worry about reduced power due to worn out belts.

Easy Service
All maintenance points are grouped for fast, reliable service.

Built-in Reliability
Renowned Cat reliability makes for trouble-free operation.

Caterpillar 930G Wheel Loader Featuring VersaLink

The new Caterpillar 930G Wheel Loader. Size, power, performance, work tool interchangeability and VersaLink loader linkage enable the 930G to perform productively in a wide range of applications.



Cat VersaLink design combines integrated toolcarrier versatility and parallel lift with the speed, forces and durability of the traditional Z-Bar linkage. VersaLink gives the Caterpillar 930G best in class breakout and lift forces and stability. A high lift version of the 930G is available for high dump or long reach requirements.



With a Quick Coupler, work tool changes are quick and easy. In this configuration, the versatility of an integrated toolcarrier and the performance of a wheel loader are combined. Equipped with pin-on tools, such as a bucket, Caterpillar 930G offers superior breakout force, tipping load and dump height.



The 930G also offers expanded versatility through configurations specifically suited to applications in agriculture, forestry, solid waste and auto recycling. For best in class performance and Caterpillar reliability and durability, look to the Cat 930G.